If you are unfamiliar with Python, ArcPy, or script tools, skip to the Getting started with Python, ArcPy, and script tools section below for a list of useful topics.
How project data in your script is found
Whenever you share a result, either as a package or as a service, and the result references a script tool, the script tool is scanned to discover any project data used in the script. When project data is found, it is consolidated into a temporary folder that is either packaged (if you are sharing a package) or uploaded to the server (if you are sharing a service).
When your script is scanned, every quoted string (either single- or double-quotes) used in a Python variable or as an argument to a function is tested to see if it is a path to data that exists. Data, in this case, means
- A layer in the table of contents (ArcMap or ArcGlobe)
- A folder
- A file
- A geodataset, such as a feature class, shapefile, geodatabase, map document (.mxd), and layer file (.lyr)
For the purposes of discussion, only data that is used as input to geoprocessing tools or paths referencing other Python modules is of interest. Output data is also consolidated, but it's not considered to be project data.
Whenever a quoted string is found in the script, the test for data existence proceeds as follows:
- Does the string refer to a layer in the table of contents?
- Does the string contain an absolute path to data (such as "e:\Warehousing\ToolData\SanFrancisco.gdb\streets")?
- Does the string reference data that can be found relative to the script location? The script location is defined as follows:
These tests proceed in sequential order. If the test passes, and the data exists, it will be consolidated, with one exception: if you are sharing a service, the server's data store is examined to determine if the data resides in the data store. If it resides in the data store, then it is not consolidated.
The examples below are based on this folder structure:
Relative paths and folders
The following technique of finding data relative to the location of the script is a common pattern, especially for services created for ArcGIS 10.0. For reference, the script code that follows resides in the Scripts folder illustrated above. The ToolData folder contains SanFrancisco.gdb. Within SanFrancisco.gdb is a feature class named Streets. In the code sample below, the path to the ToolData folder is constructed relative to the location of the script (the Scripts folder).
import arcpy import os import sys # Get the directory the script lives in. # Folders will be found relative to this location. # scriptPath = sys.path # Construct paths to ../ToolData/SanFrancisco.gdb/Streets and # ../ToolData/Warehouse.lyr # toolDataPath = os.path.join(scriptPath, "..", "ToolData") streetFeatures = os.path.join(toolDataPath, "SanFrancisco.gdb", "Streets") streetLyr = os.path.join(toolDataPath, "Warehouse.lyr")
In the code above, the string "ToolData" (an argument to the os.path.join function) is tested to see if it is data that exists. In this case, there is a folder named ToolData relative to the location of the script. This ToolData folder will be consolidated—all its contents (with the exception of subfolders as noted above) will be packaged or uploaded to the server (unless the ToolData folder is part of the server's data store).
Note that folder contents are copied, not individual files. For example, in the above code, the path to the dataset e:/Warehousing/ToolData/SanFrancisco.gdb/Streets is constructed. The consolidation process does not isolate and copy only the Streets dataset—it copies the entire ToolData folder.
Absolute path to a geodataset
An absolute path is one that begins with a drive letter, such as e:/, as shown in the code sample below.
import arcpy import os streetFeatures = 'e:/Warehousing/ToolData/SanFrancisco.gdb/Streets'
In the above code, the Streets dataset, and all other data it depends upon (such as relationship classes and domains), will be consolidated.
import arcpy import os toolDataPath = r'e:\Warehousing\ToolData' warehouseLyr = os.path.join(toolDataPath, "Warehouse.lyr")
In the above code, the entire contents of the ToolData folder is consolidated. Since the folder contents (minus subfolders) is consolidated, Warehouse.lyr will be consolidated as well, along with any data referenced by Warehouse.lyr.
Forward versus backward slashes
The Windows convention is to use a backward slash (\) as the separator in a path. UNIX systems use a forward slash (/).
Backward slash in scripting
Programming languages that have their roots in UNIX and the C programming language, such as Python, treat the backslash (\) as the escape character. For example, \t signifies a tab. Since paths can contain backslashes, you need to prevent backslashes from being used as the escape character. The easiest way is to convert paths into Python raw strings using the r directive, as shown below. This instructs Python to ignore backslashes.
thePath = r"E:\data\telluride\newdata.gdb\slopes"
Importing other Python modules
Your script may import other scripts that you developed. For example, the code below shows importing a Python module named myutils.py, which is found in the same directory as the parent script and contains a routine named getFIDName.
import arcpy import myutils inFeatures = arcpy.GetParameterAsText(0) inFID = myutils.getFIDName(inFeatures)
Whenever an import statement is encountered, the following order is used to locate the script:
- The same folder as the script. If the script is embedded in the toolbox, the folder containing the toolbox is used.
- The folder referenced by the system's PYTHONPATH variable.
- Any folder referenced by the system's PATH variable.
Another technique for referencing modules to import is to use the sys.path.append method. This allows you to set a path to a folder containing scripts that you need to import.
import arcpy import sys import os # Append the path to the utility modules to the system path # for the duration of this script. # myPythonModules = r'e:\Warehousing\Scripts' sys.path.append(myPythonModules) import myutils # a Python file within myPythonModules
In the above code, note that the sys.path.append method requires a folder as an argument. Since 'e:\Warehousing\Scripts' is a folder, the entire contents of the folder will be consolidated. The rules for copying folder contents apply here as well—everything in the folder is copied except for subfolders that are not geodatasets.
Tool validation code
If you have experience writing script tools, you may be providing your own tool validation logic. Clients of geoprocessing service do not have the capability to execute your tool validation logic—only the server has this capability. When the client sends its execute task request to the service, your validation logic will execute on the server. If your validation routines throw an error, the task will stop execution. If you're returning messages from your service, the client will receive messages thrown by your validation routines.
Validation logic is implemented with Python, and your validation code will be scanned for project data and modules, just like any other Python script. For example, your validation logic may open a folder (for example, d:\approved_projections) containing projection files (.prj) to build a choice list of spatial references the client can use when they execute your tool. This folder is not a tool parameter; it's project data used within your tool validation script. The same rules described above for Python scripts apply here, and the consequence is that the d:\approved_projections folder will be consolidated and copied to the server (unless it's found in the server's data store).
Making project data and modules tool parameters
As described above, your Python scripts are scanned when shared, and decisions are made about what data your script uses based on quoted strings found in your code. If you want to take control of this process, you can employ the practice of creating parameters for all data and modules used by your script. The script sample below shows the idea—all project data and modules are made into parameters that are passed into the script.
import arcpy import sys import os inFeatures = arcpy.GetParameterAsText(0) # Feature Layer projectDataFolder = arcpy.GetParameterAsText(1) # Folder myPythonModules = arcpy.GetParameterAsText(2) # Folder # Append the path to the utility modules to the system path # for the duration of this script. # sys.path.append(myPythonModules) import myutils # a Python file within myPythonModules # Construct a variable to hold the Streets feature class found in the # project data folder # streetsFeatures = os.path.join(projectDataFolder, "SanFrancisco.gdb", "Streets")
When your script uses parameters for all its data as shown above, several good things happen:
- You are more aware of the data your script needs—because it's a parameter, it's there for you to see on the tool dialog box. You don't have to edit your code to determine what data you're using.
- Internal tool validation logic takes over—if the parameter value references data that doesn't exist, the tool dialog box will display an error, and you cannot execute the tool to create a result.
- To reset the location of the data, you can browse for the location using the tool dialog box rather than typing the location in your script (which is error-prone).
- When the result is shared as a service, the Service Editor will set folder parameters to an Input mode of Constant; your client never sees the parameters. When you publish, the two folders will be copied to the server (unless they are registered with the data store). When your task executes on the server, your script will receive the paths to the copied folders.
Third-party modules (any module that is not part of the core Python installation) are not consolidated. You need to ensure the module exists and runs correctly on the server. This does not apply to the numpy or matplotlib modules which are installed with ArcGIS Server.
Getting started with Python, ArcPy, and script tools
If you are unfamiliar with Python, ArcPy, and script tools, the table below lists a few topics that will help you get started.
Basic concepts of creating your own geoprocessing tools.
Introductory topics to Python and ArcPy. These topics lead you to more detailed topics about Python and the ArcPy site package.
Introductory topic on creating custom script tools using Python.
Once you've become familiar with the process of creating a script tool, this topic is referred to often as it explains in detail how to define script tool parameters.